PANASONIC CS-E18VKA 2HP Inverter ECONAVI Split Type Heat Pump Air-Conditioner
The PANASONIC CS-E18VKA 2HP Inverter ECONAVI Split Type Heat Pump Air-Conditioner is a high-performance solution designed for optimal climate control. Featuring a robust 2HP capacity, this model provides 17100 Btu/h (5.00 kW) cooling and 19800 Btu/h (5.80 kW) heating, ensuring comfortable indoor environments year-round. It integrates advanced Inverter technology for energy efficiency and precise temperature regulation, alongside Panasonic's innovative ECONAVI system to minimize power consumption. With a Grade 1 Energy Label for both cooling and heating, this unit offers significant operational savings while maintaining superior air quality through its nanoe-G and nanoe-X air purification systems.
Key Features
- 2HP Heat Pump Model: Provides both efficient cooling and heating capabilities.
- Grade 1 Energy Label: Achieves top energy efficiency ratings for both cooling and heating, ensuring lower electricity bills.
- Inverter Technology: Precisely adjusts output power to maintain consistent temperatures and reduce energy waste.
- ECONAVI System: Utilizes Human Activity moving Sensor and Sunlight Sensor to optimize operation based on room conditions, enhancing energy savings without sacrificing comfort.
- Dual Air Purification: Features independent nanoe-G and advanced nanoe-X systems to inhibit viruses, bacteria, allergens, remove odors, and inactivate 99% of PM2.5 particles.
- R410A Refrigerant: Uses an environmentally friendly refrigerant.
- Smart Connectivity: Supported by the Panasonic Comfort Cloud App (requires optional WiFi Adapter CZ-TACG1) for remote control and monitoring.
Performance Specifications
- Model Numbers: Indoor Unit: CS-E18VKA, Outdoor Unit: CU-E18VKA
- Cooling Capacity: 17100 Btu/h (5.00 kW)
- Heating Capacity: 19800 Btu/h (5.80 kW)
- EER (Energy Efficiency Ratio): Cooling: 3.47 W/W; Heating: 3.84 W/W
- CSPF (Cooling Seasonal Performance Factor): 6.1486
- HSPF (Heating Seasonal Performance Factor): 4.7998
- Power Supply: 220V
- Power Consumption (Cooling): 6.7 A
- Power Consumption (Heating): 7.1 A
- Input Power (Cooling): Indoor: 1.44 kW, Outdoor: 0.28-1.99 kW
- Input Power (Heating): Indoor: 1.51 kW, Outdoor: 0.25-2.57 kW
- Moisture Removal: 2.8 L/h
- Air Circulation (Indoor / Hi): 19.4 m³/min (685 ft³/min)
Advanced Air Quality & Energy Efficiency
- nanoe-X Air Purifying System: Delivers superior performance in odor removal (e.g., cigarette, sweat, pet smell) and effectively inhibits viruses, bacteria, and allergens.
- nanoe-G Air Purifying System: Inactivates 99% of PM2.5, airborne, and adhesive micro-organisms such as bacteria, viruses, and mold, enhanced by an in-filter deactivation feature.
- ECONAVI with Intelligent Sensors: Automatically adjusts cooling or heating based on human activity and sunlight levels, preventing energy waste while maintaining comfort.
- Inverter Technology: Offers precise control over compressor speed, leading to stable temperatures, quicker cooling/heating, and significant energy savings compared to non-inverter models.
Design & Durability
- Trendy and Slim Design: The indoor unit boasts a sleek profile with a depth of only 199mm, allowing for seamless integration into modern interiors.
- AEROWINGS: Features twin flaps that provide enhanced control over the direction of airflow, distributing conditioned air more effectively.
- Anti-Corrosive Blue Fin Condenser: This protective coating acts as a barrier against water vapor, preventing oxidization and rusting of the condenser fins, thereby extending the unit's lifespan and ensuring long-term performance.
Convenience & Installation
- 24-Hour Dual On/Off Setting Timer: Allows users to program operation times for enhanced convenience and energy management.
- Operating Modes: Includes Powerful Mode for rapid cooling/heating, Quiet Mode for reduced noise levels, and Mild Dry Cooling for comfortable dehumidification without over-cooling.
- Indoor Unit Dimensions (H x W x D): 302 x 1120 x 241 mm
- Outdoor Unit Dimensions (H x W x D): 619 x 824 x 299 mm
- Net Weight: Indoor Unit: 12 kg, Outdoor Unit: 36 kg
- Piping Diameter: Liquid: ψ6.35 mm (1/4"), Gas: ψ12.7 mm (1/2")
- Power Supply Location: Indoor Unit
- Pipe Length Range: 3-30 meters
The product information above is for reference only; everything is subject to the brand's official website.
PANASONIC CS-E18VKA 2HP Inverter ECONAVI Split Type Heat Pump Air-Conditioner Review
Installation Price
| Split-type AC Standard Installation fee | |||
| Site inspection | $200 | ||
| HP | Installation fee | ||
| 3/4HP | $1650 | ||
| 1HP | $1650 | ||
| 1.5HP | $1750 | ||
| 2HP | $1950 | ||
| 2.5HP | $2600 | ||
| 3HP | $3000 | ||
| Inspection fee $100, if the installation is confirmed after inspection,will be refunded for installation fee. Please note that we can not fix the date & time for inspection, master will contact the customer directly to confirm the date. | |||
| Standard installation include: 12ft Refrigerant pipe Water pipe and electric wire 4pcs Shock absorber rubber |
Standard installation does not include the following items: Electricity supply or extension of electric wire Extra wall opening and dismantling window frame Cutting or removal for an extra-large or extra-thick glass Decoration /Finishing work such as wall-painting Delivery location which is no elevator service provide |
||
| Inverter or cool warm type AC need with extra control wire; it will be quoted in separate. | |||
| HP | Installation fee | ||
| 3/4HP ** | $380 | ||
| Split-type AC Extra Fee list | |||
| Installation of indoor unit rack (aluminum) | Per set $300 | ||
| Installation of window split type air-conditioner unit rack with concrete base more than 28" (W) X 20"(D) | Per set $300 | ||
| Installation of window split type air-conditioner unit rack without concrete base or with base less than 28"(W) X 20"(D) | Per set $500 | ||
| Outdoor air-conditioner frame (aluminum or China 202 stainless steel) | Per set (3/4-2.5HP) $500 | ||
| Same as above | Per set (3HP) $650 | ||
| Same as above | 3HP or above Quotation | ||
| Extra surface refrigerant pipe with white insulator and control wire | 3/4-1.0 HP Per feet $70 | ||
| Same as above | 1.5HP or above Per feet $80 | ||
| Control wire with PVC conduit | Included 12 feet $200 | ||
| Control wire with PVC conduit(after the12 feets) | Per feet $20 | ||
| Additional Drain Pipe | Per feet $10 | ||
| Concrete Wall opening (non structure brick wall only)*Not included leakproof & repair hole | Per Hole (less 4" thick) $200 | ||
| Curtain Wall opening (non structure brick wall only)*Not included leakproof & repair hole | Per Hole (less 6" thick) $200 | ||
| Remove waterproofed material of wall hole for refrigerator pipe which is located outside the building (9" depth or above) | Per Hole $200 | ||
| Extra refrigerant for the extra pipe(7 meters above) | Per set $500 | ||
| Installation of stainless steel water tray for outdoor unit (Highly Recommended for heat pump model) | Per set $550 | ||
| To install quiet clear protective strip | Per set $150 | ||
| Removal and Reinstallation of the window for the outdoor unit installation | Per window $150 | ||
| Normal glass covering ( 6mm thick)(Use normal glass frit: other glass frit may have additional charge ) | Per feet $80 | ||
| Frosted or tea glass seal (6mm thick) (if other glass glue is required, another quotation will be charged) per square foot | Per square foot $90 | ||
| Aluminum window flying edge | Per side $150 | ||
| Replacement of socket (each) | $120 | ||
| Replacement of plug (each) | $60 | ||
| Outdoor unit power supply (per foot) | $20 | ||
| Dismantling of old window machine and aluminum frame (iron window / iron frame is calculated separately) | $100 | ||
| Dismantling of old split machine and removal (under safe conditions) | $300 | ||
| Outdoor high-altitude work (from the ground upwards of two meters or more, or half-body stretched out of the wall and practical according to the site environment) | $300 | ||
| Radiator installation height above ground exceeds 2 meters | $300 | ||
| Opening mouth (wood board or plasterboard), excluding mouth door and restoration | $250 | ||
| Dismantling and installation of external wall insulation cover (shrimp shell) (under safe conditions) | Each(first 3 meters) $250, thereafter each meter $50 | ||
| Emergency stop system | $200 | ||
| Waterproof knife system | $200 | ||
| Digging and hiding the throat without including the mud and water closure (per foot) | $200 | ||
| Pulling the wire system one by one, pulled out from the main power box (including 15 feet of wire and insurance system) | $800 | ||
| Pulling the wire system one by one, including 10 feet of wire | $550 | ||
| Electric wire per foot | $20 | ||
| Outdoor power supply with PVC soft lamp throat and accessories (within 6 feet) | $150 | ||
| Snow seed throat shell (per foot) | $150 | ||
| The installation process of split unit is carried out in multiple steps | $150 | ||
| Arranging scaffolding for customers (reference price) (the third-party insurance amount is 20 million, if the estate requires a larger insurance amount, additional charges will be made) | Standard scaffolding (within 8 feet X 8 feet) $3800 | ||
| Additional dimensions / special scaffolding shapes / insurance plus name or address (short-term) | Quote | ||
| Safety workbench | Quote | ||
| Special installation | Quote | ||
| Moving old split unit up or down stairs (per set per floor) | $30 | ||
| Discovery Bay, outlying islands, restricted areas, and remote areas charges every single | $300 | ||
| Village entrance fee (if the car cannot reach and requires walking to the installation location and depending on the length of the road conditions) | Each single (reference price) $120 | ||
| Remarks |
|
a. 12 months warrant is provided for installation works. The warranty includes:(I)Air-conditioner frame (II)Connection failure of refrigerants pipes Maintenance service does not include the followings: Scaffolding must be provided by clients Problems caused by poor maintenance such as leaking of drain pipe due to improper and irregular maintenance Clients will responsible for the decoration /finishing work for inspection or maintenance if the air-conditioner pipe is covered or decorated. In event of discrepancy or inconsistency between the Chinese and the English version |
| Delivery | |
|
| Installation Schedule | |
|
Why us?
Why Choose BBE?
The trusted choice of over 100,000 Hong Kong families, dedicated to delivering excellence in quality and service.
Visit our flagship stores in Mong Kok, Causeway Bay, and Tuen Mun to experience over 1,000 appliances from Europe, the US, and Japan. Our consultants are ready to provide expert installation advice.
Awarded store with nearly 30,000 authentic reviews. We guarantee transparent and competitive pricing.
Get instant professional support via WhatsApp. From spec comparisons to dimension queries and installation questions, our expert team provides immediate answers.
No parallel imports! All appliances are official Hong Kong distributor stock, coming with at least a 1-year original manufacturer warranty and a 7-day defective replacement guarantee.
Our service quality is recognized by the industry and top brands alike. We have been honored with the Towngas TGC Sales Gold Award and Daikin’s Diamond Dealer status, alongside prestigious partner and distributor awards from Gree, Carrier, and Philips Smart Lock.
Our site uses SSL encryption and supports various e-payments. We offer one-stop professional delivery and installation services for a worry-free experience.
















































Extend Product Warranty .png)