Installation Pricelist

.
Thermo Ventilators Standard installation fee
Window Type $480
Ceiling Type No this service
Wall-mount Type $480
Standard installation includes:
- Windows type:
a. 3ft electric wires
b. Tailor-made aluminum fixing rack (To be installed at fixed windows frame, mounted at window's edge by aluminum angle bar)
c. Remove existing windows/glass
d. Finished by new glass; removed glass not to be re-used (Refer extra installation charge)
- Standard power socket to be provided by the customer

- Ceiling type & Wall mount type:
a. 10ft electric wires
b. Hanged by screw (Wall mount type)
c. Be fixed by screw shaft; should be suitable for product design (Ceiling type)
d. Diameter 4" x 8ft flexible aluminum air tube
e. Diameter 4" glass opening
- Standard power socket to be provided by the customer
Thermo Ventilators extra fee
Dia 4" flexible aluminum air tube. $25 per ft
Remove the old thermo Ventilator/Ventilating Fan $100
Sealing glass (2"x20") $80
Sealing glass (4"x20") $120
Sealing glass (6"x20") $150
Sealing glass (8"x20") $180
Enlarge windows edge for installation $150 each
Aluminium Composite Panel (20"x24") $300
Connect the electricity from the distribution board(Include the 15ft wire and safety lock) $800
Split the electricity from one socket(include the 10ft Wire) $250
Extra wire $20 each ft
Replace /Add MCB unit at existing electric supply terminal $350
Stairs fee $30 for each item each stairs
Installation surcharge for Tung Chung / Ma Wan area $100 each job
Installation surcharge for Discovery Bay area $400 (each job, max. 3 appliances) / $600 (each job, more than 3 appliances)
REMARK
**Installation fee table above quote is the designated contractor responsible for BBE**
Such as by other agents or other contractors delivery fee/installation fee will be different. For more information, please contact our inquiry
Standard power socket be provided by customer
If extra installation fee is not in the installation list, need to quote.
Location of installation are decided by customer. Any re-location after installation shall be subjected to extra charge.
Hong Kong Island (Tue,Thu,Sat) Kowloon (Mon to Sat) N.T. (Mon to Sat)
Cookerhood Standard installation fee
Site inspection(No return) $200
Chimney type 24/28/32" $580
Chimney type 36" $780
Telescopic type / Canopy type $580
Inclined Chimney Type 24/28/32" $580
Inclined Chimney Type 36" $780
Island type Quoted
Dismantling for Telescope / Chimney / Inclined / Island type $180
Disposal for Telescope / Chimney / Inclined / Island type $200
Taiwan-type Range hood (Not included Panasonic,KDK*) $350
Dismantling Taiwan-type Range hood $100
Disposal for Taiwan-type Range hood $100
* Taiwan-type Range hood for Panasonic,KDK $550
**1200mm/48" width extra charge $200
Standard installation includes:
a. 8ft flexible aluminum air tube.
b. Glass hose opening
Not included drill cabinet wood hole/ square hole

Installation guide for cookerhood:
The customer must ensure that the installation location must have a sufficient safety distance, otherwise the installation service cannot be provided.
Distance between most cookerhood and cooker at least 700mm / 28inch, (or According to the agent installation guide )
Range Hood extra fee list
Dia 5"/6" flexible aluminum air tube. $200
Drill cabinet wood hole (each) $60
Drill cabinet wood Square hole (each) $300
Drill a stainless steel hole* (each) $100
Cut a stainless steel pipe $400
Aluminum wall mount $200
Stairs fee a.Taiwan-type/Telescopic type / Canopy type $30
b.Chimney type/Inclined Chimney Type /Island type $50
Installation surcharge for Tung Chung / Ma Wan area $100 each job
Installation surcharge for Discovery Bay area $400 (each job, max. 3 appliances) / $600 (each job, more than 3 appliances)
REMARK
**Installation fee table above quote is the designated contractor responsible for BBE**
*If there are water pipes or electrical wires behind the stainless steel backboard, the customer must inform the installer before installation. We are not responsible for any damage during the installation process.
Such as by other agents or other contractors deilvery fee/installation fee will be different. For more information, please contact our inquiry
Standard power socket be provlded by customer
If extra installation fee is not in the installation list,need to quote.
Location of installation are decided by customer. Any re-location after installation shall be subjected to extra charge.
Hong Kong Island (Tue,Thu,Sat) Kowloon (Mon to Sat) N.T. (Mon to Sat)
Built-in kitchen appliance standard installation fee
Site inspection(No return) $200
Built-in electrical hob $380
Built-in oven, microwave oven, dish Sterilizer $500
Built-in warming drawer $500
Built-in washer $500
Built-in dishwasher $500
Built-in refrigerator $780
Wall-mount Type Dish Sterilizer $380
Dismantling for Built-in electrical hob $100
Dismantling for Built-in oven, microwave oven, dish Sterilizer, washer, dishwasher, warming drawer $180
Dismantling for Built-in refrigerator $250
Disposal for Built-in electrical hob $100
Disposal for Built-in oven, microwave oven, dish Sterilizer, washer, dishwasher, warming drawer $200
Disposal for Built-in refrigerator $200
Installation surcharge for Tung Chung / Ma Wan area $100 each job
Installation surcharge for Discovery Bay area $400 (each job, max. 3 appliances) / $600 (each job, more than 3 appliances)
Need to install additional a strip of wood if Build-in size is too wide $100
REMARK
**Installation fee table above quote is the designated contractor responsible for BBE**
Such as by other agents or other contractors delivery fee/installation fee will be different. For more information, please contact our inquiry
Standard power socket be provided by customer
If extra installation fee is not in the installation list, need to quote.
Location of installation are decided by customer. Any re-location after installation shall be subjected to extra charge.
Hong Kong Island (Tue,Thu,Sat) Kowloon (Mon to Sat) N.T. (Mon to Sat)

Gas Hob Standard Installation Fee
Built-In Gas Hob (Not included Domino Type) $450
Built-In Domino Type (30cm) Gas Hob $500
Freestanding Gas Hob $350
Range Cooker $780
Gas Hob standard installation includes:
a. Connect Gas pipe (included 76cm gas pipe)
b. Connect Electricity
Dismantle the old hob add: $100 (Not included range cooker), 
disposal the old hob add: $100 (Not included range cooker)
Gas Hob Extra Fee List
Site inspection (monday~friday) (No return) $200
Site inspection (monday~friday) (No return) $200
Only dismantle for gas hob(not included range cooker) $150
Drill cabinet top (Corina) for modify the hob (each edge) $350
Drill cabinet top (Corina) for modify the hob (2 edge) $500
Drill cabinet top (Stone) for modify the hob (each edge) $500
Drill cabinet top (Stone) for modify the hob (2 edge) $700
Stainless steel frame Quoted
Stairs fee $30
Installation surcharge for Tung Chung / Ma Wan area $100
Installation surcharge for Discovery Bay area $450
Installation surcharge for Hong Kong Island $50
REMARK
**Installation fee table above quote is the designated contractor responsible for BBE**
Such as by other agents or other contractors deilvery fee/installation fee will be different. For more information, please contact our inquiry
Standard power socket be provlded by customer
If extra installation fee is not in the installation list,need to quote.
Location of installation are decided by customer.Any re-location after installation shall be subjected to extra charge.
Standard installation is only applicable to residential user. No installation for shops, offices, factories and commercial clients

Gas Water Heater Standard Installation Fee
Gas Water heater $620
Gas Water Heater standard installation include:
a. Connect Gas pipe
b. Connect Electricity
c. Connect Water pipe
Dismantle & disposal the old heater charge $100
Gas Water Heater Extra Fee List
Site inspection (monday~friday) (No return) $200
Only dismantle & disposal the old heater $150
Stairs fee $30
Installation surcharge for Tung Chung / Ma Wan area $100
Installation surcharge for Discovery Bay area $450
Installation surcharge for Hong Kong Island $50
REMARK
**Installation fee table above quote is the designated contractor responsible for BBE**
Such as by other agents or other contractors deilvery fee/installation fee will be different. For more information, please contact our inquiry
Standard power socket be provlded by customer
If extra installation fee is not in the installation list,need to quote.
Location of installation are decided by customer.Any re-location after installation shall be subjected to extra charge.
Standard installation is only applicable to residential user. No installation for shops, offices, factories and commercial clients

Water Heater Standard installation fee
Site inspection(No return)No installation service Ask For Agent
Instantaneous Water HeaterNIL
Ask For Agent
Shower Unit Storage Water Heater
Ask For Agent
Central System Storage Water Heater (8 gal or below)
Ask For Agent
Central System Storage Water Heater (10 gal or above)
Ask For Agent
Horizontal Installation charge
Ask For Agent
Uninstall and take away the old machine
Ask For Agent
Instantaneous Water Heater Standard installation include:
a.3ft power cord (Surface wiring)
b.4ft white plastic coated copper pipe for hot and cold water
Shower Unit Storage Water Heater Standard installation include:
a.10ft power cord (Surface wiring)
b.4ft white plastic coated copper pipe for hot and cold water & 2 Copper pipe accessories
Central System Storage Water Heater Standard installation include:
a.10ft power cord (Surface wiring)
b. 3ft white plastic coated copper pipe for hot and cold water & 7 Copper pipe accessories

Water Heater extra fee(For reference only)
White plastic coated copper pipe for hot and cold water $30 / ft
White plastic pipe with drain valve (below 8ft) $100
Copper pipe accessories $30/ each
Air Bleed valve $400
Make a new water input $200
Split the electricity from one socket(include the 10ft Power cord) $800
Power cord extension $20 / ft
Power cord extension(3-phase*4) $80 / ft
Stairs fee $30 (10steps)
Installation surcharge for Tung Chung / Ma Wan area $100
Installation surcharge for Discovery Bay area $400
REMARK
Other agents or other contractors deilvery fee/installation fee will be different. For more information, please contact our inquiry
Standard power socket be provlded by customer
If extra installation fee is not in the installation list,need to quote.
Location of installation are decided by customer.Any re-location after installation shall be subjected to extra charge.
Window-type AC Standard Installation fee
HP Installation fee
3/4HP ** $380
1HP ** $380
1.5HP ** $480
2HP ** $480
2.5HP $580
3HP OR ABOVE $580
Dismantle & disposal the old Window-type AC / Dismantle & disposal the old Split-type AC (Under safety) $100 / $500
Standard installation include:
4"x4" Water dish(if the models come with)
1 inch silver colour aluminum edge
5 feet water pipe($10 for extra feet)
Standard installation does not include:
Electricity supply or extension of electric wire
Extra wall opening and dismantling window frame
Cutting or removal for an extra-large or extra-thick glass
Decoration /Finishing work such as wall-painting
Delivery location which is no elevator service provide
For Windows with concrete slab, supported by aluminum foot supporter or rubber pole. (within 4 inch height)
For Windows without concrete slab, support with aluminum U sharp base supporter with arms; 11KBtu or above windows air-con, supported with extra hanger. (Not included)
*Customer need to make sure got enough place to install the ac
*Customer need to provide the glass
*Electricity supply should be provided by the customer adjacent to the air-conditioner within 0.5m
** Panasonic , Rasonic Inverter Heat pump A/C Series 
make sure provide an outside drainage use by original drain pan & drain water accessory.
if not, no warranty by agent. Please attention to the installation feasibility ,
May be need to add aluminum U Sharp base supporter

Window-type AC Extra Fee list
To dismantle the air-conditioner & aluminum frame, transportation & disposal of the air conditioner (Per set) $100
U- shaped aluminum frame 3/4 to 2HP (Per set) $100
To fabricate the mounting frame (Per set) $100
Additional Drain Pipe (Per feet) $10
Stainless steel water tray(with 4 feet water hose)(The original plastic water tray is easy to be blocked) (Per set) $350
To install quiet clear protective strip (Per set) $150
To modify the existing T-junction of aluminum window frame (Per set) $250
To modify the existing T-junction of iron window frame (Per set) Quotation
Normal glass covering (6mm thick) (Use normal glass frit: other glass frit may have additional charge) (Per Square feet) $80
Frosted or amber-yellow glass covering (6mm thick) (Use normal glass frit: other glass frit may have additional charge) (Per Square feet) $90
To install tailor-made "Return Air Duc" (Per Set) $1500
To dismantle "Return Air Duct" (Per Set) $100
To dismantle wooden frame (Not restore) (Per Set) $200
To dismantle iron windows (Per Set) $200 up
To dismantle iron window branches (Per Set) $100
To enlarge the window space for installation, if the window space is insufficient (aluminum windows) (Per Set) $150
For bronze aluminum materials (Per Set) $100
Replacement of socket (Per Set) $120
Replacement of plug (Per Set) $60
Connect the electricity from the distribution board (Include the 15ft wire and safety lock) (Per Set) $800
Split the electricity from one socket (include the 10ft Wire) (Per Set) $250
Extra wire (Per Square feet) $20
Transportation fee of up &/or down stairs (Per floor Per unit) $30
Special installation Quotation
Discovery Bay, Outlying Islands and Restricted Area (Per Job) $300
Installation location cannot be reached by transportation and required to reach on foot $120
Remarks
a. 12 months warrant is provided for installation works.
The warranty includes:(I)Air-conditioner frame (II)Connection failure of refrigerants pipes
Maintenance service does not include the followings: Scaffolding must be provided by clients
b. Problems caused by poor maintenance such as leaking of drain pipe due to improper and irregular maintenance
c. Clients will responsible for the decoration /finishing work for inspection or maintenance if the air-conditioner pipe is covered or decorated.
Split-type AC Standard Installation fee
Site inspection $200
HP Installation fee
3/4HP $1650
1HP $1650
1.5HP $1750
2HP $1950
2.5HP $2600
3HP $3000
Inspection fee $200, if the installation is confirmed after inspection, $100 will be refunded for installation fee. Please note that we can not fix the date & time for inspection, master will contact the customer directly to confirm the date.
Standard installation include:
12ft Refrigerant pipe
Water pipe and electric wire
4pcs Shock absorber rubber
Standard installation does not include the following items:
Electricity supply or extension of electric wire
Extra wall opening and dismantling window frame
Cutting or removal for an extra-large or extra-thick glass
Decoration /Finishing work such as wall-painting
Delivery location which is no elevator service provide
Inverter or cool warm type AC need with extra control wire; it will be quoted in separate.
HP Installation fee
3/4HP ** $380

Split-type AC Extra Fee list
Installation of indoor unit rack (aluminum) Per set $300
Installation of window split type air-conditioner unit rack with concrete base more than 28" (W) X 20"(D) Per set $300
Installation of window split type air-conditioner unit rack without concrete base or with base less than 28"(W) X 20"(D) Per set $500
Outdoor air-conditioner frame (aluminum or China 202 stainless steel) Per set (3/4-2.5HP) $500
Same as above Per set (3HP) $650
Same as above 3HP or above Quotation
Extra surface refrigerant pipe with white insulator and control wire 3/4-1.0 HP Per feet $70
Same as above 1.5HP or above Per feet $80
Control wire with PVC conduit Included 12 feet $200
Control wire with PVC conduit(after the12 feets) Per feet $20
Additional Drain Pipe Per feet $10
Concrete Wall opening (non structure brick wall only)*Not included leakproof & repair hole Per Hole (less 4" thick) $200
Curtain Wall opening (non structure brick wall only)*Not included leakproof & repair hole Per Hole (less 6" thick) $200
Remove waterproofed material of wall hole for refrigerator pipe which is located outside the building (9" depth or above) Per Hole $200
Extra refrigerant for the extra pipe(7 meters above) Per set $500
Installation of stainless steel water tray for outdoor unit (Highly Recommended for heat pump model) Per set $550
To install quiet clear protective strip Per set $150
Removal and Reinstallation of the window for the outdoor unit installation Per window $150
Normal glass covering ( 6mm thick)(Use normal glass frit: other glass frit may have additional charge ) Per feet $80
Frosted or tea glass seal (6mm thick) (if other glass glue is required, another quotation will be charged) per square foot Per square foot $90
Aluminum window flying edge Per side $150
Replacement of socket (each) $120
Replacement of plug (each) $60
Outdoor unit power supply (per foot) $20
Dismantling of old window machine and aluminum frame (iron window / iron frame is calculated separately) $100
Dismantling of old split machine and removal (under safe conditions) $300
Outdoor high-altitude work (from the ground upwards of two meters or more, or half-body stretched out of the wall and practical according to the site environment) $300
Radiator installation height above ground exceeds 2 meters $300
Opening mouth (wood board or plasterboard), excluding mouth door and restoration $250
Dismantling and installation of external wall insulation cover (shrimp shell) (under safe conditions) Each(first 3 meters) $250, thereafter each meter $50
Emergency stop system $200
Waterproof knife system $200
Digging and hiding the throat without including the mud and water closure (per foot) $200
Pulling the wire system one by one, pulled out from the main power box (including 15 feet of wire and insurance system) $500
Pulling the wire system one by one, including 10 feet of wire $550
Electric wire per foot $150
Outdoor power supply with PVC soft lamp throat and accessories (within 6 feet) $150
Snow seed throat shell (per foot) $80
The installation process of split unit is carried out in multiple steps $150
Arranging scaffolding for customers (reference price) (the third-party insurance amount is 20 million, if the estate requires a larger insurance amount, additional charges will be made) Standard scaffolding (within 8 feet X 8 feet) $3800
Additional dimensions / special scaffolding shapes / insurance plus name or address (short-term) Quote
Safety workbench Quote
Special installation Quote
Moving old split unit up or down stairs (per set per floor) $30
Discovery Bay, outlying islands, restricted areas, and remote areas charges every single $300
Village entrance fee (if the car cannot reach and requires walking to the installation location and depending on the length of the road conditions) Each single (reference price) $120
Remarks
a. 12 months warrant is provided for installation works.
The warranty includes:(I)Air-con supporting rack (II)Silicone for glass seal-up (III)Refrigerant pipe work joint leakage
b. Maintenance service does not include the followings:
Scaffolding must be provided by clients
Problems caused by poor maintenance such as leaking of drain pipe due to improper and irregular maintenance
Clients will responsible for the decoration /finishing work for inspection or maintenance if the air-conditioner pipes covered or decorated.
In event of discrepancy or inconsistency between the Chinese and the English version
After installation, customer is responsible for any follow up at decoration /finishing work.
According to environment or other issues, requested to reuse existing refrigerant pipe works or drain hose. Customer should bear related service fee during at warranty or maintenance.
To install spilt air-con at windows platform will be restricted by spac ing and glass re-fx. There should have related service charge if required during at warranty or maintenance.
$20,000,000.00 valued of Public Liability insurance and third party insurance be covered for installation. For any extra be charged to customer (such as buildings management requested).
Delivery
  • Delivery: $100 per item (Waived for products with "Included delivery fee")
    a) Additional charge for Tung Chung, Ma Wan & Discovery Bay: $100 each job 
  • Additional Stair Charge for Delivery (Except village house will charge $50 for for each 14 steps, All apartment or building will charge $50 for each 10 steps, below 5 steps free of charge)
  • a) General appliances: $30 each
    b) Window type air conditioner: 3/4HP to 1.0HP $30 each, 1.5HP to 2.5HP $50 each, 3HP or above require discussion separately
    c) Split type air conditioner, refrigerator, washing machine: $50 each
             d) Built-in oven , Built-in Steam oven,Chimney Type Hood: $50 each
  • Walking distance more than 100m : Extra fee
 
Installation Schedule
  • **Installation fee table above quote is the designated contractor responsible for BBE**
  • Such as by other agents or other contractors deilvery fee/installation fee will be different. For more information, please contact our inquiry
  • Hong Kong Island (Tue,Thu,Sat) Kowloon (Mon to Sat) N.T. (Mon to Sat)
Loading...
Loading...