-
Your shopping cart is empty!
Installation Fee Schedule
Review installation and delivery charges, standard installation scope, additional works and important notes for different home appliances. All charges apply only to add-on installation services for products purchased from BBE.
Window Type Air Conditioners
Basic Installation Charges
| Capacity | Basic Installation Fee |
|---|---|
| 3/4 HP | HK$450 |
| 1 HP | HK$450 |
| 1.5 HP | HK$550 |
| 2 HP | HK$550 |
| 2.5 HP | HK$650 |
| 3 HP | HK$650 |
Basic Installation Scope
Included
- Sealing the existing glass window opening
- Install approx. 4"×4" original plastic drain pan (if supplied with the purchased model)
- Silver aluminium trim sealing within 1 inch
- Install drain hose up to 5 ft (extra length charged at HK$10/ft)
- Seal edges with acid-cure silver glass sealant
Not Included
- Electrical wiring, socket installation or extension of the supplied power cord
- Space modification, wall chiselling, removal/reinstallation of security bars or window grilles
- Cutting and removing large or extra-thick glass
- Finishing works such as paint matching, glass replacement, or wooden frame removal/reinstallation
- Carrying appliance up or down stairs
Window Air Conditioner Additional Charges
| Item | Charge |
|---|---|
| Remove old window AC and aluminium frame (iron window/frame charged separately) | 3/4 HP to 2 HP HK$100 each |
| U-shaped aluminium frame, 3/4 HP to 2 HP | HK$100 |
| Hanging/support installation, 1 pair (for 1.5 HP or above, or where required) | HK$160 |
| Drain hose beyond standard length (per ft) | HK$10 |
| Stainless steel drain pan (per set; original plastic drain pans may clog more easily) | HK$350 |
| Soundproofing pad (per unit) | HK$150 |
| Install at aluminium window top / modify T-bar | HK$250 |
| Install at iron window top / modify T-bar | Quote required |
| Glass sealing with clear glass, 6 mm thick (sealed with standard acid-cure glass sealant), per sq ft | HK$80 |
| Frosted or tinted glass sealing, 6 mm thick (other sealants quoted separately), per sq ft | HK$90 |
| Install return-air louvre (custom-made), per unit | HK$1500 |
| Remove return-air louvre, per unit | HK$100 |
| Remove wooden frame, no reinstatement | HK$200 |
| Remove iron window | From HK$200 |
| Remove iron window bar (per bar) | HK$100 |
| Trim aluminium window edge (per side) | HK$150 |
| Seal edge with bronze aluminium window trim (per unit) | HK$100 |
| Replace socket base (each) | HK$120 |
| Replace plug (each) | HK$60 |
| Install one electrical point from main switchboard (includes 15 ft cable and circuit breaker) | HK$800 |
| Install one branched electrical point (includes 10 ft cable) | HK$250 |
| Electrical cable per ft | HK$20 |
| Carry old unit down stairs (per floor per set) | HK$30 |
| Discovery Bay, outlying islands, restricted areas and remote-area surcharge | HK$300 |
| Village access fee (where vehicle access is unavailable and walking distance/road conditions apply) | HK$120 |
| Special installation | Quote required |
Other Notes for Window Type Air Conditioners
- Installation work is warranted by the contractor for one year. Product warranty and repair are provided by the relevant product distributor according to its warranty terms.
- Warranty covers the frame and water leakage caused by poor glass sealing.
- Warranty and repair do not include scaffolding/safety platforms or issues caused by improper maintenance, such as leakage due to drain hose blockage from lack of regular maintenance.
- Installation work is carried out by a government-recognised minor works contractor, who directly assumes installation responsibility and third-party insurance.
- Any relocation after installation will be quoted separately.
- Customers must obtain prior approval from the owner, building management, Housing Department or other relevant parties, and assess installation feasibility.
Split Type Air Conditioners
Basic Installation Charges
| Capacity | Basic Installation Fee |
|---|---|
| 3/4 HP | HK$1750 |
| 1 HP | HK$1750 |
| 1.5 HP | HK$1850 |
| 2 HP | HK$2050 |
| 2.5 HP | HK$2700 |
| 3 HP | HK$3000 |
Split AC site inspection fee is HK$100. If the split AC installation is confirmed after inspection, the amount will be deducted from the installation charge. A specific inspection date/time cannot be arranged; the technician will contact the customer to schedule. Inverter or cooling/heating models require additional control wiring and will be quoted separately.
Basic Installation Scope
Included
- 12 ft refrigerant pipe with white insulation
- Drain hose and power cable
- One glass hole opening and four anti-vibration pads
Not Included
- Aluminium frame
- Electrical wiring, socket installation or power-cord extension
- Space modification, wall chiselling, removal/reinstallation of iron bars or window grilles
- Cutting and removing large or extra-thick glass
- Finishing works and carrying appliance up/down stairs
Installation Examples
1.5 HP basic installation HK$1,750 (includes 12 ft piping), inverter control wire HK$200 (includes 10 ft), aluminium frame HK$300
Split Type Air Conditioner Additional Installation Charges
| Item | Charge |
|---|---|
| Additional indoor-unit frame / hanging bracket | HK$300 |
| Split AC aluminium frame on concrete platform (with platform area at least 28 in W × 20 in D) | HK$300 |
| Split AC aluminium frame on concrete platform (not suitable for cantilever slab; no platform or area under 28 in W × 20 in D) | HK$500 |
| Outdoor-unit frame (aluminium or China-made 202 stainless steel), 3/4 HP to 2.5 HP | HK$500 |
| Outdoor-unit frame (aluminium or China-made 202 stainless steel), 3 HP | HK$650 |
| Outdoor-unit frame (aluminium or China-made 202 stainless steel), 3.5 HP or above | Quote required |
| Extra refrigerant pipe with white insulation, drain hose and power cable beyond standard length (per ft), 1 HP or below | HK$70 |
| Extra refrigerant pipe with white insulation, drain hose and power cable beyond standard length (per ft), 1.5 HP or above | HK$80 |
| Additional control wire and PVC conduit for inverter or cooling/heating split AC models (includes 12 ft) | HK$200 |
| Control wire in PVC conduit beyond standard length (per ft) | HK$20 |
| Drain hose (per ft) | HK$10 |
| Concrete wall pipe opening* (non-load-bearing / non-structural position), under 4 in, each | HK$200 |
| Brick wall pipe opening*, under 6 in, each | HK$200 |
| Remove waterproofing structure in building-provided refrigerant-pipe wall opening (9 in deep or more), each | HK$200 |
| Additional refrigerant due to long piping (pipe length 7 m or above), per unit | HK$500 |
| Stainless steel drain tray with 5 ft drain hose (per set; recommended for cooling/heating split AC) | HK$550 |
| Soundproofing pad (per unit) | HK$150 |
| Remove and reinstate aluminium window | HK$150 |
| Glass sealing with clear glass, 6 mm thick (sealed with standard acid-cure glass sealant), per sq ft | HK$80 |
| Frosted or tinted glass sealing, 6 mm thick (other sealants quoted separately), per sq ft | HK$90 |
| Trim aluminium window edge (per side) | HK$150 |
| Replace socket base (each) | HK$120 |
| Replace plug (each) | HK$60 |
| Outdoor-unit power supply (per ft) | HK$20 |
| Remove old window AC and aluminium frame (iron window/frame charged separately) | HK$100 |
| Remove and dispose of old split AC (where safe) | HK$300 |
| External work at height (2 m or more above ground, or half body extending outside the wall; subject to site conditions) | HK$300 |
| Outdoor unit installation height more than 2 m above ground | HK$300 |
| Create access opening (wood board or gypsum board), excluding access panel door and reinstatement | HK$250 |
| Remove/reinstall external wall insulation cover (where safe), per unit (first 3 m) | HK$250, then HK$50 per additional metre |
| Emergency stop switch | HK$200 |
| Waterproof isolator switch | HK$200 |
| Chase wall for concealed piping, excluding plastering/finishing (per ft) | HK$200 |
| Install one electrical point from main switchboard (includes 15 ft cable and circuit breaker) | HK$800 |
| Install one branched electrical point, includes 10 ft cable | HK$250 |
| Electrical cable per ft | HK$20 |
| Outdoor power supply with flexible PVC conduit and fittings (within 6 ft) | HK$150 |
| Refrigerant pipe cover (per ft) | HK$150 |
| Split AC installation carried out in multiple visits | HK$150 |
| Scaffolding arrangement on behalf of customer (reference price; third-party coverage HK$20 million. Extra charge applies if the estate requires higher coverage), standard scaffold within 8 ft × 8 ft Note: Additional size, special scaffold shape, or adding name/address to insurance (short term) requires quotation |
HK$3800 |
| Safety work platform | Quote required |
| Special installation | Quote required |
| Carry old split AC up or down stairs (per floor per set) | HK$30 |
| Discovery Bay, outlying islands, restricted areas and remote-area surcharge, per order | HK$300 |
| Village access fee (where vehicle access is unavailable and walking distance/road conditions apply), per order (reference price) | HK$120 |
Other Notes for Split Type Air Conditioners
- Air conditioners may only be installed on a stable window or AC platform with sufficient space.
- Installation work is warranted for one year; product warranty is provided by the relevant distributor according to its warranty terms.
- Warranty covers the frame, water leakage caused by poor glass sealing, and refrigerant leakage caused by poor pipe connection.
- Scaffolding, safety platforms and issues caused by improper maintenance are not included.
- If the AC or piping is covered or finished with other materials, any future removal/reinstatement for inspection or repair is the customer’s responsibility.
- The contractor will not apply for electricity meters or ventilation licences on behalf of the customer.
- The installation location must be confirmed by the customer. Any relocation or reinstallation after installation will be quoted separately.
- After completion, decoration and finishing repairs are the customer’s responsibility.
- For window-sill split AC installations, future repair or maintenance costs arising from location and glass removal/sealing limitations are borne by the customer.
- If existing refrigerant pipes or drain pipes are reused, related future repair or maintenance costs are borne by the customer.
- Third-party and public liability insurance coverage is HK$20,000,000. If the building requires higher coverage, the additional requirement is borne by the customer.
- Charges may differ if delivery/installation is arranged by an agent or other contractor.
- A compliant power supply must be provided by the customer near the unit. Items not listed in this fee schedule must be discussed with the technician.
- *Waterproofing and finishing are not included.
Range Hoods
Standard Installation Charges
| Item | Charge |
|---|---|
| Site inspection (non-refundable) | HK$200 |
| Chimney hood 24/28/32 in (600–800 mm) | HK$620 |
| Chimney hood 36 in (900 mm) | HK$780 |
| Telescopic / built-in | HK$620 |
| Inclined hood 24/28/32 in | HK$620 |
| Inclined hood 36 in | HK$780 |
| Island hood | Quote required |
| Additional charge for 1200 mm / 48 in width | HK$200 |
| Remove old unit (chimney, inclined or telescopic hood) | HK$200 |
| Dispose of old unit (chimney, inclined or telescopic hood) | HK$200 |
| Wall-Mount Range Hood (not applicable to Panasonic / KDK) | HK$350 |
| Wall-Mount Range Hood site inspection *HK$100 refundable upon successful installation |
HK$200 |
| Panasonic / KDK Wall-Mount Range Hood standard installation fee | HK$550 |
| Remove old Wall-Mount Range Hood | HK$100 |
| Dispose of old Wall-Mount Range Hood | HK$100 |
Basic Installation Scope
Included
- Includes 8 ft aluminium duct (5 or 6 in)
Not Included / Notes
- Wood cut-out, chimney modification and partition-board removal are not included
- Please ensure the installation location has sufficient safety clearance; otherwise installation service cannot be provided.
- In general, the bottom of the range hood should be at least approx. 700 mm / 28 in above the electric hob surface / gas hob pan supports, or follow the distributor’s installation guide.
Range Hood Additional Charges
| Item | Charge |
|---|---|
| Extra-long duct (each, 6 in × 8 ft) | HK$200 |
| Wood hole opening (per board) | HK$150 | Wall-Mount Range Hood — drill round openings in wood (per board) | HK$60 |
| Square wood hole opening (each) | HK$330 |
| Drill stainless steel hole (each) | HK$100 |
| Cut stainless steel duct | HK$400 |
| Aluminium support for suspended unit | HK$200 |
| Staircase fee (per floor per item): wall-mount / telescopic / built-in | HK$30 |
| Staircase fee (per floor per item): chimney / inclined | HK$50 |
| Tung Chung and Ma Wan installation surcharge (per order) | HK$100 |
| Discovery Bay installation surcharge (per order): 3 units or fewer | HK$300 |
| Discovery Bay installation surcharge (per order): more than 3 units | HK$600 |
Gas Hobs
Standard Installation Charges
| Item | Charge |
|---|---|
| Built-in hob / domino hob (30 cm wide) | HK$500 |
| Table-top hob | HK$350 |
| Freestanding cooker | HK$780 |
| Remove old unit during installation (excluding freestanding cooker) | HK$100 |
| Dispose of old unit (excluding freestanding cooker) | HK$100 |
| Site inspection (non-refundable; not available on Saturdays) | HK$200 |
| Standalone removal of gas hob (excluding freestanding cooker) | HK$150 |
| Cut engineered stone, first cut | HK$400 |
| Cut engineered stone, two cuts | HK$550 |
| Cut marble / quartz, first cut | HK$550 |
| Cut marble / quartz, second cut | HK$850 |
| Stainless steel flange | Quote required |
| Staircase fee (per floor) | HK$30 |
| Discovery Bay installation surcharge (per order) | HK$450 |
| Tung Chung installation surcharge (per order) | HK$100 |
| Park Island installation surcharge (per order) | HK$100 |
| Hong Kong Island installation surcharge (per order) | HK$50 |
Note: Standard installation includes gas hose connection (one 76 cm flexible hose included) and electrical connection.
Gas Water Heaters
Standard Installation Charges
| Item | Charge |
|---|---|
| Install gas water heater | HK$650 |
| Remove and dispose of old unit during installation | HK$100 |
| Site inspection (non-refundable; not available on Saturdays) | HK$200 |
| Standalone removal of gas water heater | HK$200 |
| Staircase fee (per floor) | HK$30 |
| Discovery Bay installation surcharge (per order) | HK$450 |
| Tung Chung installation surcharge (per order) | HK$100 |
| Park Island installation surcharge (per order) | HK$100 |
| Hong Kong Island installation surcharge (per order) | HK$50 |
Note: Standard installation includes gas hose, water pipe and electrical connections. Standard installation applies to residential customers only.
Electric Water Heaters
Standard Installation
| Item | Charge |
|---|---|
| Site inspection (non-refundable) | Installed by agent; charges apply separately |
| Instant type (three-phase or single-phase) | Installed by agent; charges apply separately |
| Shower type | Installed by agent; charges apply separately |
| Pressure type, 6.5 gallons or below | Installed by agent; charges apply separately |
| Pressure type, 10 gallons or above | Installed by agent; charges apply separately |
| Horizontal type | Installed by agent; charges apply separately |
| Remove and dispose of old unit | Installed by agent; charges apply separately |
Standard Installation Scope
| Type | Included |
|---|---|
| Instant type | Includes 3 ft exposed wiring Includes 4 ft plastic-coated hot/cold copper pipe |
| Shower type | Includes 10 ft exposed electrical cable Includes 4 ft plastic-coated hot/cold copper pipe and 2 fittings |
| Pressure type | Includes 10 ft exposed electrical cable Includes 3 ft plastic-coated hot/cold water pipe and 7 fittings |
Electric Water Heater Additional Installation Charges (For Reference Only)
| Item | Charge |
|---|---|
| Plastic-coated hot/cold copper pipe (per ft) | HK$30 |
| White discharge-valve copper pipe (within 8 ft) | HK$100 |
| Copper pipe fitting (each) | HK$30 |
| Pressure reducing valve | HK$400 |
| Add tee water connection if no water inlet is available | HK$200 |
| Install one electrical point (includes 15 ft cable and circuit breaker) | HK$800 |
| Install branched electrical point (includes 10 ft cable) | HK$250 |
| Extend power cable (per ft) | HK$20 |
| Extend power cable (three-phase ×4, per ft) | HK$80 |
| Staircase handling (per floor per item) | HK$30 |
| Tung Chung and Ma Wan installation surcharge (per order) | HK$100 |
| Discovery Bay installation surcharge (per order): 3 units or fewer | HK$300 |
| Discovery Bay installation surcharge (per order): more than 3 units | HK$600 |
Bathroom Heaters
Standard Installation Charges
| Type | Charge |
|---|---|
| Window type | HK$480 |
| Ceiling type (false-ceiling opening not included; to be discussed separately) | Installation not available |
| Wall-mounted type | HK$480 |
Standard Installation Scope
If installed by an agent, a separate quotation is required.
- Includes 3 ft electrical cable
- Install unit frame; must be installed on a fixed window frame
- Remove existing louvre window / glass (disposal not included)
- Finish with new glass; old glass will not be reused
- Compliant power supply to be provided by the customer
- Includes 10 ft electrical cable
- Wall-mount screw installation / ceiling-suspension threaded rods
- 8 ft long, 4 in diameter flexible aluminium foil duct
- Open 4 in glass hole for air duct
- Compliant power supply to be provided by the customer
Bathroom Heater Additional Charges
| Item | Charge |
|---|---|
| Aluminium duct (per ft) | HK$25 |
| Aluminium composite panel within 20 × 24 in | HK$300 |
| Frosted glass sealing within 2 × 20 in, each | HK$80 |
| Frosted glass sealing within 4 × 20 in, each | HK$120 |
| Frosted glass sealing within 6 × 20 in, each | HK$150 |
| Frosted glass sealing within 8 × 20 in, each | HK$180 |
| Trim aluminium window edge (per side) | HK$150 |
| Replace socket base (each) | HK$100 |
| Install one electrical point (includes 15 ft cable and circuit breaker) | HK$800 |
| Remove bathroom heater / exhaust fan | HK$100 |
| Install branched electrical point (includes 10 ft cable) | HK$250 |
| Electrical cable (per ft) | HK$20 |
| Replace / add circuit breaker in existing switchboard | HK$350 |
| Tung Chung and Ma Wan installation surcharge (per order) | HK$100 |
| Discovery Bay installation surcharge (per order): 3 units or fewer | HK$300 |
| Discovery Bay installation surcharge (per order): more than 3 units | HK$600 |
Built-in Kitchen Appliances
Standard Installation Charges
| Item | Charge |
|---|---|
| Site inspection (non-refundable) | HK$200 |
| Built-in electric hob | HK$500 |
| Built-in oven | HK$500 |
| Built-in disinfection cabinet | HK$500 |
| Built-in microwave oven | HK$500 |
| Built-in warming drawer | HK$500 |
| Built-in washing machine | HK$500 |
| Built-in dishwasher | HK$500 |
| Wall-mounted disinfection cabinet | HK$500 |
| Built-in refrigerator | HK$780 |
| Remove old unit during installation – built-in electric hob | HK$100 |
| Remove old unit during installation – built-in oven / warming drawer / washing machine / dishwasher / disinfection cabinet | HK$200 |
| Remove old unit during installation – built-in refrigerator | HK$250 |
| Dispose of old unit – built-in electric hob | HK$200 |
| Dispose of old unit – built-in oven / warming drawer / washing machine / dishwasher / disinfection cabinet | HK$200 |
| Dispose of old unit – built-in refrigerator | HK$200 |
| If the cut-out is too wide, wooden strips must be added to secure screw positions | HK$100 |
| Tung Chung and Ma Wan installation surcharge (per order) | HK$100 |
| Discovery Bay installation surcharge (per order): 3 units or fewer | HK$300 |
| Discovery Bay installation surcharge (per order): more than 3 units | HK$600 |
Delivery Charges
Basic Delivery
| Item | Charge |
|---|---|
| Delivery (per item) | HK$100 |
| Tung Chung, Ma Wan and Discovery Bay surcharge (per delivery) | HK$100 |
| Carrying distance to delivery location exceeds 100 m | Additional charges apply |
Note: Charges may differ if delivery is arranged by an agent. Please contact us for details.
Staircase Handling
Except for village houses, where 14 steps count as one floor, other buildings count 10 steps as one floor. The first 5 steps are free of charge.
| Item | Charge |
|---|---|
| General appliances | HK$30 / item / floor |
| Window AC, 3/4 HP to 1 HP | HK$30 / item / floor |
| Window AC, 1.5 HP to 2.5 HP | HK$50 / item / floor |
| Window AC, 3 HP or above | To be discussed |
| Split AC, refrigerator, washing machine | HK$50 / item / floor |
| Built-in oven, steam oven, chimney hood, built-in / freestanding dishwasher | HK$50 / item / floor |
Note: Charges may differ if delivery is arranged by an agent. Please contact us for details.
General Notes
- The above installation fees are quoted for work handled by BBE’s appointed contractor / appointed registered electrical contractor.
- Charges may differ if delivery/installation is handled by other agents or contractors. Please contact us for details.
- A compliant power supply must be provided by the customer near the appliance.
- Items not listed in this fee schedule must be discussed with the technician.
- The installation location must be confirmed by the customer. Relocation or reinstallation after installation at the customer’s request will be quoted separately.
- Installation schedule: Hong Kong Island (Tue, Thu, Sat); Kowloon (Mon to Sat); New Territories (Mon to Sat).
- Delivery coverage excludes outlying islands, restricted areas and overseas locations.
- Delivery or installation is generally arranged during office hours. For non-office hours such as evenings or public holidays, please check feasibility in advance.















































